Motorcycle Hot grips & ATV heated grips Main technical parameter

Hot grips & heated grips Main technical parameter:

1. heating wire material: The far infrared ray includes the gold material. Able to bear water, able to bear toughly, able to bear the oil, resistively is 5-5.5 ohms and each meter
   
   
2. high temperature the most once of electric heat hand: Greater than 60 degrees
   
   
3. Hot grip and heated grips handle resistance value: Between 10-12 ohms
   
   
4. working voltage: Between 12-16 volts
   
   
5. use the ambient temperature: During being 30 degrees below zero - 40 degrees above zero
   
   
6. three shelf type ranges of temperature adjustment: Low-temperature shelf (downward 40 degrees, high-temperature shelf (upwards) 60 degrees), shut in, use the alternating and direct current the middle.
   
   
7. each temperature adjustment range: If clockwise rotation intensifies, clockwise rotation is counterclockwise to rotate, lower the temperature, and turn on the power finally. The range of temperature control must use the direct current between 20 degrees - 65 degrees.

Attention: Forbid the handle not to penetrate the direction to manage, and energize and test continuously under the calm state indoors. Must go it carry on in imitating by tests windy state, otherwise, will because can dispel the heat and damage handle!